Cable Fault Tester | TDR Cable Fault Pre-Locator | XHGG501B
Product Description
The cable fault tester is a special instrument for measuring and analyzing the fault status and fault distance of power cables. It adopts modern electronic technology to realize signal filtering, acquisition, data processing, graphic display and graphic analysis, and completes cable speed measurement, cable length test, cable fault distance test and resistance test.
This cable fault tester is suitable for low-resistance, short-circuit, open-circuit and disconnection faults of power cables, coaxial cables, street light cables, buried wires, etc. of various materials with different cross-sections and different media, as well as high leakage resistance and flashover high resistance faults. The technical parameters meet the standard requirements of DL/T 849.1 (General Technical Conditions for Special Tester for Power Equipment Part 1: Cable Fault Flash Tester) and JJF1042 (Calibration Specification for Cable Fault Tester).
Applications & Target Audience: Engineered for shipyard and marine engineering electrical teams, hospital and medical campus facility management units, defense installation maintenance teams, and oil and gas field electrical maintenance departments that pre-locate low-resistance, open-circuit, disconnection, high-resistance leakage and flashover faults in power cables up to 32km.
Product Features
- Industrial-grade 5.7-inch dual-color screen with clear waveform and menu display;
- Single-chip centralized control, push-button operation, strong anti-interference ability;
- Functions such as distance measurement, speed measurement and resistance measurement;
- The micro-printer is integrated with the host, which can print test waveforms and test reports at any time;
- Fully automatic continuous sampling, waveform capture is timely and accurate;
- With low-voltage pulse sampling method and flashover sampling method;
- Built-in large-capacity battery pack, easy to use;
- Adopt protective case, not lower than IP54.
Technical Parameters
| Parameter |
Specification |
| Sampling frequency |
100MHz |
| Low voltage pulse amplitude |
35V |
| Pulse width |
0.2uS/2uS |
| Minimum resolution |
1.0m |
| Test blind area |
≤35m |
| Ranging range |
≥32km |
| Measurement error |
≤±(0.5%×L+1m), L is the cable length |
| Communication interface |
RS232 |
| Power supply mode |
Charging AC110V~240V, 50Hz/60Hz |
| Battery |
Built-in 5200mAH lithium battery |
| Working conditions |
-20~+65℃, relative humidity ≤90% |
| Volume |
358L×284W×168H |
| Weight |
4.6kg |
| Compliance |
DL/T 849.1, JJF1042 |
Application Scenarios
| Application Scenario |
Typical Applications |
| Shipyards & Marine Engineering Facilities |
Pre-locating faults in dry-dock and yard power cables where continuous operation is critical |
| Hospitals & Medical Campuses |
Rapid cable fault pre-location for critical care facilities to minimize power interruption risk |
| Defense Installations |
Testing buried power and communication cables in restricted sites with the portable 4.6kg instrument |
| Oil & Gas Fields |
Locating faults in long field distribution cables in remote and harsh environments |
Combining the low-voltage pulse method and the high-voltage flashover method in one portable 4.6kg instrument, the XHGG501B helps field engineers complete rough fault pre-location quickly and accurately before precise pinpointing.
Packing List
| Item |
Quantity |
| Cable fault tester host (with integrated micro-printer) |
1 unit |
| Low-voltage sampling line (single Q line) |
1 piece |
| High-voltage sampling line (double Q line) |
1 piece |
| Sampler |
1 piece |
| Power cord |
1 piece |
| Fuse |
1 piece |
| Grounding wire |
1 piece (optional) |
FAQ
Q1: Who is this cable fault tester designed for?
It is designed for shipyard and marine engineering electrical teams, hospital and medical campus facility management units, defense installation maintenance teams, and oil and gas field electrical maintenance departments that test power cable faults on site.
Q2: What cable fault types can the XHGG501B test?
It is suitable for low-resistance, short-circuit, open-circuit and disconnection faults of power cables, coaxial cables, street light cables and buried wires of various materials, as well as high leakage resistance and flashover high resistance faults, using the low-voltage pulse method and the high-voltage flashover method.
Q3: What are the key technical specifications of the XHGG501B?
It features 100MHz sampling frequency, 35V low-voltage pulse amplitude, 0.2uS/2uS pulse width, 1.0m minimum resolution, a test blind area of ≤35m, a ranging range of ≥32km, and a measurement error of ≤±(0.5%×L+1m).
Q4: What standards does the XHGG501B comply with?
Its technical parameters meet the standard requirements of DL/T 849.1 (General Technical Conditions for Special Tester for Power Equipment Part 1: Cable Fault Flash Tester) and JJF1042 (Calibration Specification for Cable Fault Tester), and it adopts a protective case not lower than IP54.
Q5: What is included in the delivery and what are the trade terms?
The delivery includes the cable fault tester host with integrated micro-printer, low-voltage sampling line (single Q line), high-voltage sampling line (double Q line), sampler, power cord, fuse and optional grounding wire. The instrument is covered by a one-year warranty with lifetime maintenance and technical services.
Your message must be between 20-3,000 characters!
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews