Multifunction Digital Underground Metal Cable Pipeline Detector with 15W Transmitter and Cable ID

The XHGX507C Cable Pipe Locator is a high-performance underground utility detection system engineered for municipal infrastructure, electric power grid maintenance, and pipeline network operations. Equipped with a 15W high-power transmitter, precision receiver, coupling clamp, and flexible identification clamp, it delivers reliable cable path tracing, burial depth measurement (0–20m), intelligent identification of up to 20 cables in a single session, and optional A-frame ground fault pinpointing — all from one integrated platform.

Unlike conventional locators that require repeated trips between transmitter and receiver for each cable, the XHGX507C allows technicians to pre-calibrate up to 20 cables at the transmitter end, then identify them one by one at the remote end — dramatically reducing fieldwork time and improving safety compliance on multi-cable job sites.

• 20-Cable Pre-Calibration: Calibrate up to 20 target cables at the transmitter, then identify each remotely. The receiver marks successful matches with ✔ and non-target cables with ✘ for instant, foolproof identification — no guesswork, no missed cables.
• 360° Wire Cruise Mode: A guided navigation interface that continuously displays pipeline path, depth, current, and relative position in real time. Operators with zero prior experience can trace pipelines accurately without training.
• Signal Distortion Measurement: Simultaneously displays peak and trough waveforms. In clean conditions, peak and trough positions align — any deviation immediately flags interference, preventing false tracing and costly digging errors.
• 15W High-Power Output (9-Level Adjustable): Full autoranging impedance matching ensures maximum signal delivery across varying soil conditions. Direct connection reaches up to 20km; coupling method up to 10km.
• 11 Active + Passive Detection Frequencies: Active: 640Hz, 1.28kHz, 2.56kHz, 3.20kHz, 4.09kHz, 8.19kHz, 10.2kHz, 32.7kHz, 65.6kHz, 81.9kHz, 197kHz. Passive: 50Hz/60Hz power frequency and RF bands. Switch frequencies on the fly to isolate the target line from adjacent utilities.
• Ultra-Narrowband Digital Filtering: Effectively suppresses power-frequency and harmonic interference from adjacent live cables. Anti-interference indicator turns red when signal integrity is compromised, so operators never act on unreliable data.
• Current Direction Analysis: On select frequencies (640Hz–3.20kHz), the receiver analyzes current phase to distinguish the target pipeline from parallel lines — eliminating the most common cause of tracing errors on congested utility corridors.
• Optional A-Frame Ground Fault Location: Pinpoints insulation damage points on pipelines with directional arrow guidance toward the fault. Essential for preventive maintenance and emergency repair crews.
• Three Signal Injection Methods: Direct connection (strongest signal, up to 20km), coupling clamp (non-contact, for live cables), and induction (no physical connection required, suitable for shallow tracing under 2m).

• Transmitter with 5-inch touchscreen
• Receiver with 4.3-inch touchscreen
• Transmitter coupling clamp (Φ125mm)
• Flexible identification clamp — Rogowski coil (Φ200mm)
• Red and black direct-connection test leads (3m each)
• AC charger (input 100–240V, 50/60Hz)
• Exported wooden case with pressure-resistant toolbox design
• A-Frame ground fault locator (optional)

CE and ISO certified. Complies with IEC61010-1 safety standards. Backed by a 12-month warranty with certificate. Customization available — contact us with your specific detection range, frequency, or clamp size requirements.

Frequently Asked Questions