Xhgx507X China Power Factory Price Underground Cable Route Tracer Metal Pipeline Locator

1. The signal transmission connection mode of the transmitter: direct connection method, coupling method, induction method.
2. Receiver working mode: wave peak method, wave valley method, step voltage method.

This XHGX507X underground cable pipe locator uses the electromagnetic field signal of the underground cable to locate the cable, and gives the depth and current readings, so as to realize the cable detection function.
 

Transmitter Features:
★Displays the current output frequency.
★Display the current output power; it can display low-grade, mid-grade, high-grade and full-grade respectively.
★Display the current working mode; can display direct connection, coupling, induction respectively.
★Displays the current loop current value; the effective display is 0-999 mA.
★Display the current loop impedance value; the effective display is 00001 - 20000 ohms.
★Indicates the current battery level; it is represented by a battery symbol, all black is full power, and the left side is the current battery percentage display.
 

Receiver Features:
1. It shows the current receiving frequency value. The initial power-on frequency is 577Hz.
2. The signal strength is shown by the length of the grating. The grating moves from both sides to the middle, and when it is full, the signal is too strong or out of range.
3. The signal strength is shown by a number. The valid range is 00.0-99.9. When 99.9 is shown, the signal is too strong or out of range.
4. A colored compass shows the direction of the pipeline.
5. It shows the depth of the measured underground line and the current on the line.
6. The gain is automatically adjusted by default. This means the amplification factor of the signal currently processed by the receiver, and the dynamic range is 000-140db. The initial boot gain is 60db.
7. The way the receiver gets the signal is shown. It can show narrow peak, wide peak, trough, broad peak arrow, peak + trough, and external equipment. The initial power-on mode is wide peak. External devices are automatically recognized.
8. It shows the current battery level. This is shown by the battery symbol.
9. It shows the current working status of the buzzer. This is shown by the horn symbol plus a line. One line means low loudness, two lines mean medium loudness, three lines mean high loudness, and a cross means to turn off the buzzer. The initial power-on sets the buzzer to off.
10. When you turn off the cable, an arrow automatically appears to show the cable location. Two arrows show up above the cable.
11. When you use the SS frequency, this function shows the direction of the signal current. This helps the operator find the path.
12. When you use the SS frequency, the receiver shows the phase of the signal. Press the frequency key for a long time to clear the phase.

Function
1) It can quickly and effectively determine the direction and depth of underground  cable /metal pipelines. It can also identify power outages and live cables, and use the A-frame to accurately locate low-resistance cable faults to ground.
2) It has signal strength indication, left and right arrow indication, and compass direction indication.
3) The maximum depth of the detection pipeline can reach 20 meters.
4) Automatic sounding: When the instrument is placed above the pipeline, it will automatically display the true depth of the target pipeline.
5) Signal identification: Accurate identification of cables from three dimensions of signal amplitude, signal direction and signal phase.
6) Current direction indication: It can track the current direction and phase of the signal, effectively improving the accuracy of the search path.
7) The 70% sounding method of automatic prompting can easily determine the 70% signal point through graphics and prompt sounds.