Description
The XHHV535-2T high voltage surge generator is currently the most user-friendly trolley-type DC impulse high-voltage equipment. It can be used for shock discharge in the detection of medium and low voltage cable faults. High-precision test cable fault sampling waveform module and small transformer are installed inside, which can truly achieve the effect of not being damaged by impact, and it also has the functions of automatic timing impact, manual impact and withstand voltage test.
Features
|
Impulse voltage |
0~35kV (adjustable) |
|
High voltage partial pressure |
2.5 level |
|
Built-in capacitor |
2μF |
| Discharge power | 1225J |
|
Impact power |
2000W |
Working principle
![]()
Side panel
![]()
1. Power socket (220V 50Hz): instrument working power supply, AC220V connection port;
2. Fuse Holder: AC220V power supply system fuse installation location;
3. Signal socket: use double Q wire to connect this unit and cable fault tester to collect flashover waveform, which is only valid during high voltage flashover.
Onsite testing case
![]()