A 120 kV, 2 mA DC hipot tester for cable, transformer and arrester testing. The control box is 13 kg and the multiplier 3.2 kg, so the set is carried rather than transported.
120 kV DC covers 35 kV and 66 kV cable classes with margin, together with the transformer and breaker insulation found in the same substations. It is the voltage most often ordered when a team works across distribution and sub-transmission equipment but does not need a 200 kV or 300 kV source.
On cable the set is used after jointing and after a repair, with the leakage current recorded at each voltage step. On transformers it is used for winding insulation checks during a planned outage. The same 0.75UDC-1mA reference point is available for arresters on the same site visit.
The control box is 13 kg and the multiplier 3.2 kg at this configuration. Two people can move the complete set to a cable termination or a transformer bay without a trolley, which is usually the difference between a test that gets done and one that is postponed.
The set is rated for 30 minutes at rated load and 10 minutes at 1.1 times rated voltage. Voltage, current and time are displayed during the run, and the reading at each step is written into the test record.
| Configuration 120 kV / 2 mA | Output voltage | Output current | Output power | Charging current | Control box | Multiplier |
|---|---|---|---|---|---|---|
| 120 kV / 2 mA | 120 | 2 | 240 | 3 | 13 | 3.2 |
| Parameter | Value |
|---|---|
| Voltage measurement error | <= 1.0 % (full scale) +/- 1 digit |
| Current measurement error | <= 1.0 % (full scale) +/- 1 digit |
| Ripple factor | <= 0.5 % |
| 0.75UDC-1mA button | Precision <= 1.0 % |
| Working mode | 30 min at rated load; 10 min at 1.1 times rated voltage |
It is used for 35 kV and 66 kV cable classes, and for transformer and breaker insulation in the same voltage band. The exact test voltage comes from the standard applied on site.
At 120 kV / 2 mA the control box is 13 kg and the multiplier 3.2 kg. They are carried as two pieces.
Yes. The 0.75UDC-1mA function is included, with the precision stated for this configuration.
Send the cable class, the highest test voltage and the capacitance per phase, and we will confirm whether the 120 kV / 2 mA configuration covers the list.
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews