A 60 kV, 2 mA DC withstand set for industrial maintenance teams that test arresters, breakers, motors and short cable runs on a fixed schedule.
The set is split into a control box and a multiplier so it can be carried into a switchgear room, a cable basement or a workshop bay. The case is a portable type rather than a rack unit, and the controls are arranged for one person to run the test while watching the specimen.
A stable DC output makes the leakage reading repeatable between visits. The platform uses voltage feedback to hold the output as the specimen charges, and the ripple is kept within the published limit. That is what allows two tests six months apart to be compared with confidence.
Industrial users usually have a fixed list: the same arresters, the same breakers and the same motors every year. A 60 kV / 2 mA set matches that list without paying for voltage or current that is never used. Where the list includes long cable, a 5 mA configuration is the better fit.
Over-voltage and over-current limits are set before the test and act on the output. The duty is 30 minutes at rated load and 10 minutes at 1.1 times rated voltage, which suits a scheduled test sequence with cooling time between specimens.
| Configuration 60 kV / 2 mA | Output voltage | Output current | Output power | Charging current | Control box | Multiplier |
|---|---|---|---|---|---|---|
| 60 kV / 2 mA | 60 | 2 | 120 | 3 | 11.6 | 2.3 |
| Parameter | Value |
|---|---|
| Voltage measurement error | <= 1.0 % (full scale) +/- 1 digit |
| Current measurement error | <= 1.0 % (full scale) +/- 1 digit |
| Ripple factor | <= 0.5 % |
| Working mode | 30 min at rated load; 10 min at 1.1 times rated voltage |
| Working environment | -10 C to +40 C, <= 85 % RH, altitude below 1500 m |
Yes. The control box and multiplier are separate portable units, and the output is limited to 60 kV / 2 mA, which matches most industrial preventive test lists.
30 minutes at rated load, then 10 minutes at 1.1 times rated voltage as the short-term rating, with cooling between specimens.
Yes, within -10 C to +40 C and 85 % RH, with the usual precautions for high voltage work in damp conditions.
Send the equipment list and the test voltage for each item, and we will confirm whether 60 kV / 2 mA covers the whole schedule.
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews