A 120 kV, 2 mA DC withstand tester for transformer and breaker insulation, used in planned outages where the winding or the interrupter insulation has to be proved before the equipment is returned to service.
A transformer winding is tested at DC for insulation resistance and withstand. The 120 kV class covers the insulation levels of many distribution and sub-transmission transformers, and 2 mA is sufficient for the winding capacitance involved. The oil and winding temperature should be recorded, because insulation resistance changes with temperature.
Vacuum and SF6 interrupters, bushings and support insulation are checked at DC during maintenance. The test is short and the current is small, which is why a 2 mA set is adequate and a larger source adds nothing to the result.
The 0.75UDC-1mA function covers arresters on the same site, so a transformer or breaker test and an arrester check can be planned for the same outage. The transformer, breaker and arrester results are recorded separately, each with its own test voltage and current.
The control box is 13 kg and the multiplier 3.2 kg at 120 kV / 2 mA. The two pieces are carried separately, which keeps the set usable where a trolley cannot reach.
| Configuration 120 kV / 2 mA | Output voltage | Output current | Output power | Charging current | Control box | Multiplier |
|---|---|---|---|---|---|---|
| 120 kV / 2 mA | 120 | 2 | 240 | 3 | 13 | 3.2 |
| Parameter | Value |
|---|---|
| Voltage measurement error | <= 1.0 % (full scale) +/- 1 digit |
| Current measurement error | <= 1.0 % (full scale) +/- 1 digit |
| Ripple factor | <= 0.5 % |
| 0.75UDC-1mA button | Precision <= 1.0 % |
| Working mode | 30 min at rated load; 10 min at 1.1 times rated voltage |
Yes for the winding capacitance of the transformers covered by 120 kV. The charging current should still be checked for very large units.
Yes. Breaker insulation, bushings and support insulation within 120 kV are tested with the same DC output.
Yes. The 0.75UDC-1mA reference function is included.
Send the transformer and breaker ratings on the outage list, and we will confirm the voltage and current class that covers them.
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews