A 60 kV, 5 mA DC hipot tester for cable and motor insulation, where the higher current class shortens the charging time on specimens with more capacitance.
At a given voltage, a specimen with more capacitance takes longer to charge and draws more current during the test. The 5 mA class charges that specimen in a practical time where a 2 mA set would sit waiting. For cable sections and motor windings the difference is often the reason the test fits into the outage window.
A cable is a capacitor. Its capacitance rises with length, and the charging current rises with capacitance and voltage. Before the test, compare the calculated charging current with the 5 mA output so that the set is not asked to hold a current it cannot supply.
Motor and generator windings are tested at DC for insulation resistance and withstand. The 5 mA output covers most low and medium voltage machines inside 60 kV. The winding temperature should be recorded with the result, because insulation resistance moves with temperature.
The 0.75UDC-1mA button is included, so an arrester on the same site can be tested with the same set. The precision for this function follows the 60/5 configuration document.
| Configuration 60 kV / 5 mA | Output voltage | Output current | Output power | Charging current | Control box | Multiplier |
|---|---|---|---|---|---|---|
| 60 kV / 5 mA | 60 | 5 | 300 | 7.5 | 11.6 | 2.3 |
| Parameter | Value |
|---|---|
| Voltage measurement error | +/- 1 % (full scale) +/- 1 digit |
| Current measurement error | +/- 1 % (full scale) +/- 1 digit |
| Ripple factor | <= 0.5 % |
| 0.75UDC-1mA button | Precision <= 0.5 % |
| Working mode | 30 min at rated load; 10 min at 1.1 times rated voltage |
When the specimen capacitance is large enough that charging at 2 mA would take too long, typically longer cable sections and larger motor windings.
Yes. A 10 kV motor insulation test sits well inside the 60 kV range; the test voltage comes from the applicable standard.
Yes. The 0.75UDC-1mA reference button is provided for zinc oxide arrester testing.
Send the cable length and capacitance per phase, or the motor rating, and we will confirm whether 5 mA covers the charging current.
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews